Đăng nhập qua email
Quên mật khẩu ? Tạo tài khoản
Danh mục sản phẩm
NOARK ELECTRIC DF ELECTRIC ACCUENERGY ORING NETWORK THIẾT BỊ CHO THỦY ĐIỆN TỦ BẢNG ĐIỆN DỊCH VỤ KỸ THUẬT
Nhận tin

Công ty Khải Minh kính chào quáy khách

Bài viết xem nhiều
Lượt truy cập
  • 3
  • 555
  • 1,560,471

Lượt xem: 1087

Installation relays Ex9CH20

Mã sản phẩm : ex9ch20

Installation relays with modular design Ex9CH20. These relays are intended especially for household applications and wherever minimum dimensions and modular design are required

0
Số lượng:

    Installation relays with modular design Ex9CH20. These relays are intended especially for household applications and wherever minimum dimensions and modular design are required. They serve mainly for switching prevailingly resistance loads close to AC-1 up to 20A but also for motor applications AC-3. Relays are offered in various single, two and four-contact combinations. 

    • Meet requirements of IEC / EN 61095
    • Rated current up to 20 A
    • Control coil voltage 24, 230 or 240 V AC
    • Rated frequency 50/60 Hz
    • 1, 2 or 4-contact versions
    • Various contact combinations
    _________________
    Download Datasheet

Sản phẩm liên quan

0

DC MCB Ex9BP

Aptomat DC Ex9BP dùng cho hệ thống DC nói chung và phù hợp với hệ thống Photovoltaics do được thiết kế để bảo vệ mạch mà không phụ thuộc vào cực tính của nguồn điện.

0

Surge protection Ex9UE1

The Ex9UE1 35 line is a group of Class I Surge Protective Devices. They are intended as a protection against direct hit of lightning strokes of high intensities or in installation with often occurrence of lightning strokes

0

Surge Protection Ex9UE3

The Ex9UE3 line is a group of Class III Surge Protective Devices. They are intended as a fine protection against transient overvoltage, installed downstream to Class II SPDs

0

RCCB Ex9CL

Modular residual current devices Ex9CL-H and Ex9CL-N in two or four-pole design. Technology is based on the classical principle of permanent magnet and electromagnetic armature, providing full voltage independence of protective functions. Circuit breakers comply with the requirements of the standards IEC/EN 61008-1.